G-shock GD-200 User Manual download pdf (Page 4)

Operation Guide 3267

E-30

Alarm Types

The alarm type is determined by the settings you make, as described below.

• Daily alarm

Set the hour and minutes for the alarm time. This type of setting causes the alarm to

sound everyday at the time you set.

• Date alarm

Set the month, day, hour and minutes for the alarm time. This type of setting causes

the alarm to sound at the specific time, on the specific date you set.

• 1-Month alarm

Set the month, hour and minutes for the alarm time. This type of setting causes the

alarm to sound everyday at time you set, only during the month you set.

• Monthly alarm

Set the day, hour and minutes for the alarm time. This type of setting causes the alarm

to sound every month at the time you set, on the day you set.

E-31

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm

screens until the one whose time you want to set is

displayed.

x3x1 x2

:00

• You can configure Alarm1 as a snooze alarm or a one-time alarm. Alarms 2 and

3 can be used as one-time alarms only.

• The snooze alarm repeats every five minutes.

2. After you select an alarm, hold down A until the hour setting of the alarm time

starts to flash. This indicates the setting screen.

• This operation turns on the alarm automatically.

3. Press C to move the flashing in the sequence shown below to select other settings.

Hour

Minutes

Day

Month

E-32

4. While a setting is flashing, use D (+) and B (–) to change it.

• To set an alarm that does not include a month (daily alarm, monthly alarm), set x

for the month. Use D and B until the x mark appears (between 12 and 1) while

month setting is flashing.

• To set an alarm that does not include a day (daily alarm, 1-month alarm), set xx

for the day. Use D and B until the xx mark appears (between the end of the

month and 1) while the day setting is flashing.

• When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. (A indicator) or p.m. (P indicator).

5. Press A to exit the setting screen.

Alarm Operation

The alarm sounds at the preset time for about 10 seconds. In the case of the snooze

alarm, the alarm operation is performed a total of seven times, every five minutes, until

you turn the alarm off or change it to a one-time alarm (page E-34).

• Alarm and Hourly Time Signal operations are performed in accordance with the

Timekeeping Mode time.

E-33

Note

• Pressing any button stops the alarm tone operation.

• Performing any one of the following operations during a 5-minute interval between

snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen (page E-8)

Displaying the Alarm

setting screen (page E-31)

To test the alarm

In the Alarm Mode, hold down D to sound the alarm.

E-34

To select the operation of Alarm

1. In the Alarm Mode, use D to select Alarm1.

2. Press A to cycle through the available settings in the sequence shown below.

Snooze alarm onOne-time alarm on Alarm off

• The applicable alarm on indicator is displayed in all modes when an alarm is turned

on.

• The snooze indicator flashes during the 5-minute intervals between alarms.

• Displaying the Alarm1 setting screen (page E-31) while the snooze alarm is turned

on turns off the snooze alarm automatically (making Alarm1 a one-time alarm).

E-35

To turn Alarms

and

on and off

1. In the Alarm Mode, use D to select a one-time alarm

(alarm number 2 or 3).

2. Press A to toggle the displayed alarm on and off.

• Turning on a one-time alarm (2 or 3) displays the alarm

on indicator on its screen.

• The alarm on indicator is displayed in all modes.

• If any alarm is on, the alarm on indicator is shown on

the display in all modes.

To turn the hourly time signal on and off

1. In the Alarm Mode, use D to select the Hourly Time

Signal.

2. Press A to toggle the displayed item on and off.

• Turning on the Hourly Time Signal displays the hourly

time signal on indicator on its screen.

• The hourly time signal on indicator is displayed in all

modes.

Alarm on indicator

Hourly time signal on

indicator

E-36

Dual Time

The Dual Time Mode lets you keep track of time in a

different time zone. You can select Standard Time or

Daylight Saving Time for the Dual Time.

• The seconds count of the Dual Time is synchronized

with the seconds count of the Timekeeping Mode.

To set the Dual Time

1. Press C to enter the Dual Time Mode (page E-7).

2. In the Dual Time Mode, hold down A until the DST

setting starts to flash, which indicates the setting

screen.

3. Press C to move the flashing in the sequence shown

below to select the other setttings.

DST

Minutes

Hour

Dual time

(Hour : Minutes Seconds)

Timekeeping Mode time

E-37

4. When the setting you want to change is flashing, use B and D to change it as

described below.

5. Press A to exit the setting screen.

• The DST indicator on the Dual Time Mode screen indicates that DST is turned on for

the Dual Time Mode time.

Screen: To do this:

Toggle between Daylight Saving Time (ON)

and Standard Time (OF)

Change the hour or minutes

Do this:

Press D.

Use D (+) and B (–).

E-38

Illumination

An LED (light-emitting diode) illuminates the face of the

watch for easy reading in the dark. The watch’s auto light

switch turns on illumination automatically when you angle

the watch towards your face.

• The auto light switch must be turned on (indicated by

the auto light switch on indicator) for it to operate.

• See “Illumination Precautions” (page E-45) for other

important information about using illumination.

To illuminate the display manually

In any mode, press B to turn on illumination.

• The above operation turns on illumination regardless of

the current auto light switch setting.

• You can use the procedure below to select either 1.5

seconds or 3 seconds as the illumination duration. When

you press B, illumination will remain on for about 1.5

seconds or 3 seconds, depending on the current

illumination duration setting.

Auto light switch on

indicator

E-39

To specify the illumination duration

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. While the seconds are flashing, press B to toggle the

setting between 1.5 seconds (

) and 3 seconds ( ).

3. Press A to exit the setting screen.

1 2 3 4 5

Operation Guide 3267 1

Comments to this Manuals

No comments

G-shock GD-200 User Manual Page 4

Comments to this Manuals

Related products and manuals for Clock G-shock GD-200